Saf-holland XL-PH10409UM PH-419 Series Rigid Type Pintle Hook Uživatelský manuál stáhnout pdf (Strana 8)

XL-PH10409UM-en-US Rev C · 2012-08-03 · Amendments and errors reserved. © SAF-HOLLAND, Inc.

Mounting Instructions

6. Pintle Hook, Plunger,

and Air Chamber with

Bracket Installation

NOTE: Holland recommends a Type 24

air chamber.

Before installing the pintle hook, plunger

and air chamber with bracket (Figure 4),

make sure that the mounting structure is

of sufficient strength to support the rated

capacity of the pintle hook. Refer to SAE J847

for structural performance requirements.

1. Install the pintle hook with air chamber

and bracket to the mounting structure

using the bolt hole pattern as specified

(Figure 6).

2. Verify mounting structure hole pattern

matches the dimensions listed (Figure 6).

3. Insert the bottom four (4) bolts of

the pintle hook using four (4) new 3/4"

diameter Grade 8 bolts, ASTM Grade C

lock nuts, and hardened 3/4" washers

(Figure 5).

Figure 4

Figure 5

Figure 6

'063

(3"%&

#0-54

'063

(3"%&$

-0$,/654

'0638"4)&34

2.38"

(60.3 mm)

7.50"

(190.5 mm)

4.75"

(120.7 mm)

Ø .81"

(20.6 mm)

THRU (6 REQ.)

6.62"

(168.2 mm)

5.00"

(127.0 mm)

2.50"

(63.5 mm)

7.88"

(200.0 mm)

5.19"

(131.8 mm)

Ø 3.25"

(82.6 mm)

3.31"

(84.1 mm)

2.13"

(54.0 mm)

2.00"

(50.8 mm)

2.38"

(60.3 mm)

.38"

(9.5 mm)

Ø .69"

(17.5 mm)

THRU (2 REQ.)

Ø 1.38"

(34.9 mm)

THRU

5.00"

(127.0 mm)

7.75"

(196.9 mm)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Komentáře k této Příručce

Žádné komentáře

Saf-holland XL-PH10409UM PH-419 Series Rigid Type Pintle Hook Uživatelský manuál Strana 8

Komentáře k této Příručce

Související produkty a manuály pro Pro auto Saf-holland XL-PH10409UM PH-419 Series Rigid Type Pintle Hook