Saf-holland XL-PH10409UM PH-419 Series Rigid Type Pintle Hook Uživatelský manuál stáhnout pdf (Strana 7)

XL-PH10409UM-en-US Rev C · 2012-08-03 · Amendments and errors reserved. © SAF-HOLLAND, Inc.

Mounting Instructions

Figure 1

Figure 3

5.00"

(127.0 mm)

Ø 3.25"

(82.6 mm)

2.00"

(50.8 mm)

2.38"

(60.3 mm)

2.13"

(54.0 mm)

3.31"

(84.1 mm)

Ø .81" (20.6 mm)

THRU (6 REQ.)

5.19"

(131.8 mm)

7.88"

(200.0 mm)

2.50"

(63.5 mm)

6.62"

(168.2 mm)

Installation Options

The PH-419 rigid mount pintle hook is

available in three (3) configurations: pintle

hook only, page 7; pintle hook, plunger and

air chamber with bracket, page 8 and pintle

hook with plunger and air chamber without

bracket, page 10. Each conﬁguration requires

a different installation which is described in

the following sections. Be sure to verify your

configuration before beginning installation.

Pintle Hook Only Installation

Before installing the pintle hook only (Figure 1),

make sure that the mounting structure is of

sufﬁcient strength to support the rated capacity

of the pintle hook. Refer to SAE J847 for

structural performance requirements.

1. Install the pintle hook to the mounting

structure using the bolt hole pattern as

specified (Figure 3).

2. Verify mounting structure hole pattern

matches the dimensions listed (Figure 3).

3. Insert and tighten all six (6) new 3/4"

diameter Grade 8 bolts, ASTM Grade C

lock nuts and hardened 3/4” washers

(Figure 2). Torque to 200 ft.-lbs.

/tNQFS4"&+

Figure 2

4*9

(3"%&

#0-54

4*9

(3"%&$

-0$,/654

4*98"4)&34

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Komentáře k této Příručce

Žádné komentáře

Saf-holland XL-PH10409UM PH-419 Series Rigid Type Pintle Hook Uživatelský manuál Strana 7

Komentáře k této Příručce

Související produkty a manuály pro Pro auto Saf-holland XL-PH10409UM PH-419 Series Rigid Type Pintle Hook