Saf-holland XL-FW403-01 Electronic Lock Indicator RK-10076 Uživatelský manuál stáhnout pdf (Strana 2)

2

DISPLAY AND COUPLING HISTORY

When the download is complete, a display similar

to the one shown in FIGURE 6 will appear on your

computer screen. The numbers below correspond to

the numbers shown in FIGURE 6.

Memory Check.

The memory is automatically checked for

corruption, and the results will appear as “OK”

or “FAILS”.

If “OK” is displayed, the coupling history

appears.

If “FAILS” is displayed, the coupling history may

be inaccurate. Turn the power to the ELI off and

then on. Repeat Steps 2 through 5 in the “Run

Data Download Software” section.

If the memory check continues to fail, the ELI

display box should be replaced.

Serial Number.

The serial number displayed in the coupling

history will match the serial tag affixed to the

outside surface of the ELI display box.

Total number (up to 16 million) of coupling

attempts detected by the ELI.

A coupling attempt is counted when the

ELI detects a change from “Ready to Couple”

status to “Proper Couple” status, or when an

error code number occurs.

The remainder of the Coupling History report

displays a detailed summary for the indicated

number of the most recent coupling events.

The ELI memory capacity limits the storage

to approximately 250 of the most recent

coupling events.

Number of proper couples.

A proper couple is attained when the ELI detects,

first, the kingpin in the lock at the

proper height; and second, the lock mechanism

fully closed in the locked position.

Number of total attempts.

Per

cent pr

oper couples.

The per

centage of total couples that wer

e proper

is calculated using the following formula: Proper

couples (5) ÷ total attempts (6) x 100.

RUN DATA DOWNLOAD SOFTWARE

1

. Double click the executable file (Hitch Report

4.2.exe) that was downloaded from the floppy

disk.

2. Select the “Read” button. See FIGURE 2.

3. Check the ELI display box to make sure an error

code “1” or “3” is showing. If neither appears,

turn the power to the ELI unit off, then on until

code “1” or “3” is displayed. See FIGURE 3.

4. Once the box is ready, click “Yes.” See FIGURE 4.

5. As the software is downloading the data, the

ELI display will simultaneously show a GREEN,

locked padlock icon and a RED, unlocked

padlock icon. See FIGURE 5.

FIGURE 2

FIGURE 3

FIGURE 5

FIGURE 4

5

5

6

6

7

1

2

3

4

GREEN RED

FLASHING RED

1 2 3 4

Komentáře k této Příručce

Žádné komentáře